Huawei AP7052DN Hardware Installation And Maintenance Manual page 164

AP7052DN&AP7152DN
Hardware Installation and Maintenance Guide
Downward Port, Upward Cable
Upward Port, Upward Cable
Horizontal Port, Upward Cable
Bending Radius Requirements

Issue 01 (2017-12-29)
The bending radius of a 7/8'' feeder must be more than 250 mm, and that of a 5/4'' feeder
must be more than 380 mm.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Appendix
157