Huawei AP7052DN Hardware Installation And Maintenance Manual page 20

AP7052DN&AP7152DN
Hardware Installation and Maintenance Guide
4.
5.
In a scenario with heavy vibrations, tighten the AP to the mounting bracket using M4x30 screws with a
torque of 1.4N•m. This prevents the AP falling off from due to vibrations. In normal scenarios, you do
not need to install these screws.
Issue 01 (2017-12-29)
Connect the cables. For details, see 2.7 Cable Connection.
Align the rubber feet of the device over the mounting slots on the mounting bracket and
vertically push the AP to secure it. When the spring clip is popped up, push the AP
downward until it snaps into place (you can hear a click).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 AP Installation
13