Installing A 2-Pin Round Connector And A Dc Power Cable - Huawei AP7052DN Hardware Installation And Maintenance Manual

AP7052DN&AP7152DN
Hardware Installation and Maintenance Guide
Figure 5-115 Feeding the terminal into the jack



Step 3 Move the cable slightly and ensure that it is securely connected.
Step 4 Before you remove a cord end terminal, loosen the screw counterclockwise.
----End

5.1.5.2.3 Installing a 2-Pin Round Connector and a DC Power Cable

This topic describes how to install a 2-pin round connector and a DC power cable and related
notes.
Context
Figure 5-116 shows the 2-pin round connector with a DC power cable.
Figure 5-116 2-pin round connector and a DC power cable
Procedure
Step 1 Waterproof cables to be connected.
Issue 01 (2017-12-29)
Ensure that the exposed section of the terminal is less than 2 mm (0.079 in.) in length.
Do not press the insulation of the terminal.
Insert only one terminal into one jack.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Appendix
99