Huawei AP7052DN Hardware Installation And Maintenance Manual page 70

AP7052DN&AP7152DN
Hardware Installation and Maintenance Guide
Figure 5-49 Shielded RJ45 connector
1: Core
wires
Procedure
Step 1 Strip 20 mm outer jacket off the network cable, peel off the braid shield backward, and cut off
the aluminum foil and protection band, as shown in Figure 5-50.
Ensure that the shielded layer is intact when stripping outer jackets off the network cable.
Keep the cable insulation intact when stripping the shielded layer.
Issue 01 (2017-12-29)
2: Aluminum 3: Braid
foil shield
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4: Outer 5: RJ45
jacket connector
5 Appendix
6: Load 7: Cable
bar support rack
63