Huawei AP7052DN Hardware Installation And Maintenance Manual page 28

AP7052DN&AP7152DN
Hardware Installation and Maintenance Guide


Connecting Network Cables
Table 2-5 Network cable types supported by Ethernet interfaces and maximum transmission
distances
Interface Rate
GE
2.5GE
5GE
Issue 01 (2017-12-29)
Cable ties are bound neatly facing the same direction, and those at the same horizontal
line must be in a straight line. Cable tie tails should be cut smoothly and evenly.
Labels or nameplates must be attached to the cables after they are installed.

6-a-1 stands for the six-around-one cable bundle mode, with one cable in the center and six cables
bundled evenly around it.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Network Cable Type
CAT5e or higher
CAT5e or higher unshielded
twisted pair (UTP)
CAT5e or higher shielded
twisted pair (STP)
CAT5e UTP
CAT5e STP
CAT6 or higher
2 AP Installation
Maximum Transmission
Distance
100 m
100 m
200 m
When the transmission
distance is greater than 100
m, this network cable can
only be used to connect the
following switches:
 S6720-52X-PWH-SI-AC
F
 S6720-52X-PWH-SI
 S6720-56C-PWH-SI-AC
 S6720-56C-PWH-SI
 S6320-32C-PWH-SI
 S6720-32C-SI-AC

S6720-32C-SI-DC
 S6720-32C-PWH-SI-AC
 S6720-32C-PWH-SI
 100 m (Only the first 30
m of cables is bundled in
6-a-1 mode.)
 55 m (All cables are
bundled.)
 100 m (Each cable is
bundled separately.)
100 m
100 m
21