Huawei AP7052DN Hardware Installation And Maintenance Manual page 79

AP7052DN&AP7152DN
Hardware Installation and Maintenance Guide
Figure 5-65 Cable
A: Connector
jacket
Procedure
Step 1 Route the network cable through the connector jacket, as shown in Figure 5-66.
Figure 5-66 Routing the network cable through the connector jacket
Step 2 Strip 20 mm outer jacket off the cable and cut off the nylon layer inside the jacket, as shown
in Figure 5-67.
Ensure that the aluminum foil used as a shielded layer is intact when stripping outer jackets
off the twisted pair cable.
Issue 01 (2017-12-29)
B: C: Core wires
Connector
of the twisted
pair
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
D: Aluminum foil used
as the network cable
shield
5 Appendix
E: Network
cable jacket
72