Huawei AP7052DN Hardware Installation And Maintenance Manual page 89

AP7052DN&AP7152DN
Hardware Installation and Maintenance Guide
Figure 5-85 Pins of an RJ45 connector
Pin8
Procedure
Step 1 Feed both connectors of the cable into the ports of the cable tester.
Step 2 After the connectors are properly inserted, turn on the tester. If the indicators from 1 to G turn
on simultaneously, you can infer that the pins work normally and the wires are correctly
connected.
Figure 5-86 Testing the conduction and connections of wires
Step 3 Gently shake the connector and repeat
good contact with the core wires and Ethernet ports, as shown in Figure 5-87.
Issue 01 (2017-12-29)
Pin1
Turn the switch to the S position to slow down lighting of the indicators so that you can see the
indicators more clearly, as shown in Figure 5-86.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Step 2 to check whether the metal contact strips are in
5 Appendix
82