Installing An Ap Into A Ceiling - Huawei AP7052DN Hardware Installation And Maintenance Manual

AP7052DN&AP7152DN
Hardware Installation and Maintenance Guide
3.

2.6.4 Installing an AP into a Ceiling

An AP can be installed in a removable or irremovable ceiling. For details, see
in a Removable Ceiling
Installing an AP in a Removable Ceiling
1.
Issue 01 (2017-12-29)
Align the rubber feet of the device over the mounting slots on the mounting bracket and
vertically push the AP to secure it. When the spring clip is popped up, push the AP
horizontally until it snaps into place (you can hear a click).
 Before fixing the adjustable buckle with a screw, adjust the buckle to a proper position based on the
T-rail width.
 Ensure that the AP is correctly installed on the mounting bracket and there is 200 mm space above
and around the AP for maintenance.
 In a scenario with heavy vibrations, tighten the AP to the mounting bracket using M4x30 screws
with a torque of 1.4N•m. This prevents the AP falling off from due to vibrations. In normal scenarios,
you do not need to install these screws.
and
 This mode is not applicable to the AP with external antennas (including IoT card antennas and AP
antennas).
 You need to purchase a plastic enclosure, mounting bracket, and other accessories separately. The
part number is 21242880.
 A ceiling needs to bear the weight of four times the total weight of the device and mounting bracket
without damage.
 The screws provided for ceiling-mounting of APs are 30 mm long and can be used to fix an AP on a
ceiling no thicker than 15 mm. To install APs on thicker ceilings, you need to purchase longer
screws.
Remove a ceiling tile, draw the AP mounting position on the ceiling tile using an
opening mold, and cut an opening.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Installing an AP in an Irremovable
2 AP Installation
Installing an AP
Ceiling.
16