Huawei AP7052DN Hardware Installation And Maintenance Manual page 68

AP7052DN&AP7152DN
Hardware Installation and Maintenance Guide
Step 7 Cut off the surplus cables along the lower edge of the wire holder, as shown in Figure 5-45.
Figure 5-45 Cutting off surplus cables
Step 8 Put the connector body onto the wire holder and turn the metal shell by 90° , as shown in
Figure 5-46.
Ensure that the wire holder is in good contact with the connector body.
Figure 5-46 Putting the connector body onto the wire holder
Step 9 Push the metal shell toward the connector body until the wire holder and the connector body
are engaged completely. Crimp the connector, as shown in Figure 5-47.
Issue 01 (2017-12-29) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Appendix
61