Basic Specifications - Huawei AP7052DN Hardware Installation And Maintenance Manual

AP7052DN&AP7152DN
Hardware Installation and Maintenance Guide
Type
Alarm
Fault

1.3 Basic Specifications

Table 1-4 provides basic specifications of the AP7052DN and AP7152DN.
Table 1-4 Basic specifications
Item
Physical
specifications
Power
specifications
Environment
Issue 01 (2017-12-29)
Color Status
once
every 5s
(0.2 Hz)
Green Blinking
once
every
0.25s (4
Hz)
Red Steady on
Dimensions (H x
W x D)
Weight
System memory
FLASH
Power input
Maximum power
consumption
Operating
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
connection is normal, and no STA is associated
with the AP. The system is in low power
consumption state.
 The software is being upgraded.

After the software is loaded and started, the AP
requests to go online if it works in Fit AP or
cloud-based management mode. The indicator
remains in this state before the AP successfully
goes online.
 The AP works in Fit AP or cloud-based
management mode and fails to go online.
A fault that affects services has occurred, such as a
DRAM detection failure or system software
loading failure. The fault cannot be automatically
rectified and must be rectified manually.
Description
52 mm × 220 mm × 220 mm
 AP7052DN: 1.68 kg
512 MB DDR3L
16 MB NOR FLASH + 128 MB NAND FLASH
 DC: 42.5 V to 57 V
 PoE power supply: in compliance with IEEE
802.3at/bt
 DC/802.3bt power supply: 33 W (excluding the
output power of the USB port)
 802.3at power supply: 25.5 W (The USB function
is unavailable. The port rate of 5/2.5GE/PoE_IN
decreases to 2.5 Gbit/s. The IoT card power is
lower than 0.5 W.)
NOTE
The actual maximum power consumption depends on local
laws and regulations.
 -60 m to +1800 m: -10° C to +50° C
1 Product Overview
4