AP4050DN-E
Hardware Installation and Maintenance Guide
4.
5.
2.6 Installing the AP
Remove the protective film on the surface before installation to prevent electrostatic discharge.
2.6.1 Installing the Device on a Wall
Issue 05 (2018-02-02)
3
1
2
1. AP4050DN-E
Install RF cables and sort cables following the instruction shown in the figure.
NOTE
l The diagonal size of a hexagon SMA connector must be less than or equal to 8 mm; otherwise, the
cable cannot be installed.
Slide the cover back.
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2. IoT card
2 AP Installation
3. M2x7 screws
14