Appendix C: CSMIM2-16UG/MOD4-UG Port Upgrade Instructions
C.2.1
Contents of the Kit
Table C-1 lists the contents of the CSMIM2-16UG upgrade kit.
Table C-1 CSMIM2-16UG Upgrade Kit Contents
Item
1
2
3
4
5
6
7
8
C.2.2
Required Tools
The required tools are:
•
Phillips screwdriver
C.2.3
Disassembly Instructions
The following instructions describe disassembling the CSMIM2-16.
Refer to Figure C-1 for location of screws and standoffs on CSMIM2-16.
Observe all antistatic precautions when handling electronic
!
equipment.
CAUTION
1.
Remove the unit from the MMAC.
2.
Remove the (2) 4-40 flathead screws and (2) 6-32 screws that secure
the stiffeners to the mother board and faceplate. You may discard the
old stiffeners.
3.
Remove the (3) 6-32 faceplate mounting screws from the topside of
the MIM. Discard the old faceplate.
C-2
Qty.
Description/Part No.
1
Faceplate (32 Port)
4
Spacer, Hex 6-32 x 3/4
2
Stiffener, Front Panel (32 Port)
1
Daughter Board
4
Screw, Pan Head 6-32 x 5/16
6
Flat Washer, 6
2
Screw, Pan Head 6-32 x 3/8
1
Label, Blank
CSMIM2 Installation Guide