Pre-Installation; Locating The Ethernet Jumpers - Cabletron Systems CSMIM2-16 Installation Manual

Chapter 2: Installing the CSMIM2
2.3

PRE-INSTALLATION

Installing the CSMIM2 involves setting jumpers to select an Ethernet
channel and management services for the module.
2.3.1

Locating the Ethernet Jumpers

The CSMIM2/MODMIM has two Ethernet jumpers and one Unmanaged
Module Group jumper. Figure 2-1 shows the locations and jumper
numbers for the Ethernet and Unmanaged Module jumpers.
2-2 CSMIM2 Installation Guide