Cabletron Systems CSMIM2-16 Installation Manual page 28

Chapter 2: Installing the CSMIM2
Forcing a misaligned module into place can damage the
!
CSMIM2 or the MMAC backplane.
CAUTION
MMAC-M8FNB
5. Secure the module to the MMAC chassis by tightening the knurled
knobs. If you do not tighten the knurled knobs, vibration can cause the
module to lose contact with the backplane and disrupt your network.
6. Reinstall the MMAC chassis safety bars.
7. Power-up the MMAC (if it is not already ON).
8. After the system boot procedure, the CPU LED should be indicating
proper CSMIM2 operation.
Proceed to connect the appropriate network segments to the CSMIM2.
2-6
Module Guide Channels
Figure 2-2 Installing the CSMIM2
Knurled Knob
CSMIM2 Installation Guide
07