Stats - Cabletron Systems CSMIM2-16 Installation Manual

3.2.17 stats

The stats command displays current network statistics gathered by the
ROM. Use stats along with the boot command to help isolate problems.
Table 3-3 describes the network statistics displayed by the stats
command. The syntax is:
stats [-slip]
The stats command display looks like this:
monitor:: stats
Ethernet Statistics
Frames Received:
CRC Errors:
Alignment Errors:
Resource Drops:
Bus Wait Drops:
Bad Types/Lengths:
Statistic
Frames Received
CRC Errors
Alignment Errors
Resource Drops
Bus Wait Drops
CSMIM2 Installation Guide
398 Frames Sent:
0 Carrier Sense
0 Clear to Send Losses:
0 Collisions Detected:
0 Excessive Collision Losses
0
Table 3-3 Network Statistics
Description
The number of frames received.
The number of CRC checksum errors detected.
The number of frames received misaligned with a CRC
error.
The number of packets dropped because the ROM
code could not buffer them quickly enough. The ROM
code cannot always handle back-to-back incoming
packets. The CSMIM2 accepts the first response it
receives and drops all others. Dropped packets are
normal.
The number of packets dropped due to waiting too
long for a bus to become available.
Commands
Losses:
3-25
3
0
0
0
0