Using More Than One Operating Panel To Control The Sonar (Mk2) - Kongsberg Simrad SU90 Operator's Manual

Simrad SU90 Operator Manual
b Type or copy the IP address into the relevant box.
c Type or copy the MAC address into the relevant box.
d Select
ADD Sonar PC
e Observe that your Processor Unit is added to the list.
f Close the web browser.
5 Make sure that the Operating Panel is functional.
a Make sure that the blue indicator is lit, and check that you can move the
cursor on the screen.
b On the Processor Unit desktop, double-click the SU90 icon to start the program.
Wait until the SU90 system operates normally.
c Press and hold
Operating Panel.
Observe that the
Make sure that the SU90 system is turned off.
d Turn on the SU90 system with the
e Make sure that you can control the cursor, and that you can make selections in
the menu system.
f Press and/or turn selected buttons, and make sure that the corresponding
function is activated in the user interface.
Related topics
Installing and maintaining software, page 153
Using more than one Operating Panel to control the sonar
(Mk2)
A secondary Operating Panel may be connected to the Processor Unit. This may be
useful in conjunction with a second display if you wish to control the SU90 system
from two different locations on your vessel.
Prerequisites
The Operating Panel is installed as specified in the Installation manual. The Processor
Unit is turned on. The following specific items are required for this task:
• Computer mouse
• Computer keyboard
• Ethernet switch
Make sure that your selected switch has a large bandwidth capacity. Minimum 1
Gb (1000BASE-T) is required.
160
.
depressed four minimum four seconds to turn off the
Power
Transceiver On/Off
Power
dialog box opens automatically.
button on the Operating Panel.
381291/D