Kongsberg Simrad SU90 Operator's Manual page 117

The
Operating Panel
assign functionality to the programmable buttons. This page is located in the
dialog box. The
Installation
Note
The SU90 system supports two different operating panels. These are referred to as "Mk1"
and "Mk2". In this publication all descriptions and references are related to "Mk2".
Procedure
1 Open the
Setup
2 On the menu, select
Setup
selected from the menu on the left side.
3 On the left side of the
4 Select Operating Panel Mk2.
5 Select
Mode Selection
6 Assign one predefined user setting or presentation mode to each button on the
Operating Panel.
7 At the bottom of the page, select
8 Continue your work in the
Related topics
Defining the user-selected features on the Operating Panel, page 113
381291/D
page is used to select which physical hardware panel you use, and to
dialog box is located on the
menu.
Installation
dialog box, select
Installation
to specify what you want to use the buttons for.
Apply
Installation
menu.
Setup
.
Observe that the
Installation
This dialog box contains a number of pages
Operating Panel
to save your settings.
dialog box, or select
Operating procedures
Installation
menu opens.
.
to close it.
OK
115