Kongsberg Simrad SU90 Operator's Manual page 124

Simrad SU90 Operator Manual
Set the switch to position LOWER.
a
Lowering is automatically stopped when the
If necessary, the transducer can be stopped in any position by setting the
Hoist/Lower Switch
b Set the switch to position STOP.
5 Hoisting the transducer:
a Set the switch to position HOIST.
Hoisting is automatically stopped when the
If necessary, the transducer can be stopped in any position by setting the
Hoist/Lower Switch
b Set the switch to position STOP.
6 Locate the
Hoist/Lower Switch
Note
For normal operation from the Operating Panel, the switch must be set to REMOTE.
7 Close the cabinet door.
Related topics
Lowering and hoisting the transducer from the sonar room, page 120
122
to STOP.
to STOP.
(S302). Set the switch to position REMOTE.
is activated.
Lower Limit Switch
is activated.
Upper Limit Switch
381291/D