Kongsberg Simrad SU90 Operator's Manual page 158

Hide thumbs Also See for Simrad SU90:
Table of Contents

Advertisement

Simrad SU90 Operator Manual
Note
Once you receive your software license string(s), do not lose them. We suggest that you
copy the information into a text file (for example Notepad), and add relevant information.
Place the text file on the computer desktop, and make sure that backup copies are made.
When you work in the
changes made on a page. You must do this before you continue working on a different
page.
The following licensing options are available for the SU90 system:
: The SU90 system supports netCDF4, where the number refers to the version
NetCDF
of the format. SONAR-NetCDF4 is a data and metadata convention for storage of
data from active sonars in NetCDF4 formatted files, defined by The International
Council for the Exploration of the Sea (ICES). Sonar-NetCDF4 consists primarily of
a naming convention and a data structure within the NetDCF4 data model.
: The SU90 systems may include a built-in sonar simulator. This is
Simulator
a software program designed to simulate real echoes under different operating
conditions. The purpose of the simulator is to enable training and troubleshooting
even when your vessel is not sailing.
: The centre operational frequency is 26 kHz, but you can select any
Extended range
operational frequency from 20 to 30 kHz in steps of 1 kHz. This frequency range
gives you an operating range of up to xxx m depending on the acoustic conditions.
By adding a specific software license you can increase the maximum range setting
to 150 to 10,000 metres.
Procedure
1
On the
menu, select
Setup
Observe that the
of pages selected from the menu on the left side.
2
On the left side of the
Observe that the
3
Obtain the necessary information about your SU90 system:
• Hardware ID
4
Send the information to one of our dealers or distributors.
You can also use the request form on our website, or contact our support department
directly. You can use the following e-mail address:
purchase.order@simrad.com
Once the software license string(s) have been returned to you (most likely by e-mail),
you can install the licenses into the software.
156
dialog box, you must always select
Installation
Installation
dialog box opens. This dialog box contains a number
Installation
dialog box, select
Installation
page opens.
Software License
.
Software License
to save the
Apply
.
381291/D

Advertisement

Table of Contents
loading

Table of Contents