Kongsberg Simrad SU90 Operator's Manual page 24

Simrad SU90 Operator Manual
•
Position Track
the tilt and bearing based on the movements of your vessel. It locks on a position
defined by its latitude, longitude and depth. The bearing and tilt settings are
automatically adjusted to compensate for the movements of your vessel.
• : A target track permits the SU90 system to automatically control
Target Track
the tilt and bearing based on the movements of the chosen target. It locks on the
target defined by its position, heading and speed. The bearing and tilt settings are
automatically adjusted to follow the movements of the tracked target.
A new manually initiated tracked object is automatically given priority status.
Relevant information about the priority object can be found in the lower left corner
of the view. If you change the tilt or bearing settings manually the priority status is
lost.
K : Use the trackball to control the cursor in the user interface.
Trackball
Before you can change the settings related to a view, you must click inside the view to
activate it. The changes you make are by default only valid for the active view. Several
of the functions offer
the views in the current presentation mode.
22
: A position track permits the SU90 system to automatically control
. If you select
Apply to All
your setting is applied to all
Apply to All
381291/D