Kongsberg Simrad SU90 Operator's Manual page 242

Simrad SU90 Operator Manual
hoisting
the transducer from the sonar room ........ 121,
123, 125
the transducer using hand crank ..................... 123
the transducer using Hoist/Lower Switch .......... 121
the transducer using Hoisting Contactor............ 125
Hoisting Contactor
hoisting the transducer ................................ 125
how to
activate factory default settings ...................... 112
adjust horizontal direction of sonar
beam................................................. 36, 66
adjust sonar range................................... 31, 61
adjust the backlight on the Operating Panel.......... 99
adjust the bearing ................................... 36, 66
adjust the echo sensitivity ......................... 33, 59
adjust the gain ....................................... 33, 59
adjust the output power ................................. 55
adjust the radius of the search area ............... 31, 61
adjust the TVG ........................................... 60
assign custom user settings ........................... 114
assign functions to F1, F2 and F3 ................... 117
assign functions to rotary switches .................. 116
assign presentation modes ............................ 114
change the colour palette used in the
presentation ........................................... 101
change the environmental parameters............... 103
check the environmental conditions in the sonar
room.................................................... 191
check the status of the transceiver boards .......... 172
choose colour brightness.............................. 102
choose colour scale .................................... 102
choose echo colours ................................... 102
choose the fishing gear in use .......................... 76
configure the Operating Panel............ 157, 161, 164
configure the sensor interface ........................ 137
define ship dimensions ................................ 143
define ship origin ...................................... 143
define the Ethernet (LAN) port parameters ........ 129
define the file and folder settings for data
recording................................................. 86
define the middle position of the transducer ........ 105
define the physical size of the tracking area.......... 75
define the serial port parameters ..................... 129
define the transmission (ping) modes ................. 44
delete existing user settings .......................... 111
delete marker using Objects menu..................... 71
delete marker using shortcut menu .................... 71
delete, copy and move echo data files................. 88
enable Coordinated Universal Time (UTC) .......... 98
expand the range within the sonar range.............. 62
hide the menu system ........................ 41, 96, 211
hoist the transducer from the sonar
room........................................ 121, 123, 125
hoist the transducer using hand crank............... 123
hoist the transducer using Hoist/Lower
Switch.................................................. 121
hoist the transducer using Hoisting
Contactor .............................................. 125
increase the visibility of the information
panes ................................................... 101
insert the installation parameters for the motion
reference unit ......................................... 148
insert the installation parameters for the
transducer.............................................. 145
240
inspect and clean the computer ...................... 192
inspect and clean the display ......................... 191
inspect and clean the Hull Unit ...................... 194
inspect and clean the Operating Panel .............. 192
inspect and clean the Processor Unit ................ 192
inspect and clean the transceiver..................... 193
inspect and clean the Transceiver Unit.............. 193
inspect sacrificial anodes.............................. 198
install navigation and other sensors
(summary) ............................................. 127
install the operational software ...................... 153
install the software license............................ 155
lower and hoist the transducer from the user
interface.................................................. 48
lower the transducer from the sonar
room........................................ 121, 123, 125
lower the transducer using hand crank.............. 123
lower the transducer using Hoist/Lower
Switch.................................................. 121
lower the transducer using Lowering
Contactor .............................................. 125
make a noise/speed curve to determine vessel
noise.................................................... 178
measure flow noise .................................... 182
measure noise at different speeds.................... 178
measure noise in passive mode ...................... 177
measure the size of a school relative to the
purse seine............................................... 72
move the view to another display...................... 92
obtain a software license.............................. 155
place a marker using operating panel ................. 70
place the menu on the left side of the
presentation ............................................. 97
rearrange the layout of the presentation .............. 93
record echo data.......................................... 88
record raw data ........................................... 88
record sonar data ......................................... 88
reduce bottom and surface reverberation ............. 81
reduce noise and false echoes .......................... 83
reduce noise and reverberation......................... 79
reduce propeller noise and interference............... 80
reduce the light emitted by the display
presentation ........................................... 100
remove the operational software..................... 154
rename saved user settings ........................... 110
replace sacrificial anodes ............................. 198
replay raw data ...................................... 52, 89
restore original views.................................... 94
restore previous views................................... 94
save a screen capture .................................... 41
save sequential screen captures ........................ 41
save the current user settings ..................... 43, 108
select a geographical area for accurate
tracking .................................................. 74
select best operating frequency ................... 40, 57
select inactive operating mode ......................... 52
select measurement units ............................. 103
select menu language............................... 39, 95
select navigational information on the top
bar ........................................................ 97
select normal operating mode ..................... 30, 50
select replay file .......................................... 90
select replay operating mode ...................... 52, 89
select tooltips in the user interface .................... 99
select which operating panel to use ................. 113
381291/D