Kongsberg Simrad SU90 Operator's Manual page 238

Simrad SU90 Operator Manual
•
Place Ruler
Place the cursor over the first echo. Right-click to open the shortcut menu, then
select . The ruler starts wherever you place the cursor, and ends when you
Place Ruler
release the button. The length and relative bearing of the ruler is displayed next to
it. Once a ruler has been established you can not make changes to it. You can place
as many rulers as you like in the view.
Select
Delete Ruler
several rulers from the view.
•
Delete Ruler
Use to remove one selected ruler from the view. Place the cursor on the
Delete Ruler
line, right-click when the cursor turns into a finger, then select
the shortcut menu.
•
Delete All Rulers
allows you to delete all the rulers in the current view.
Delete All Rulers
•
Ship To Centre
Select
Ship to Centre
This function is typically used when you have used the
to move the ship symbol away from the centre of the view.
•
Reset Ship Centre
This function is useful when you need to "reset" the view after using the
or functions. Right-click and
Centre Zoom
symbol to the centre of the presentation.
•
Set New Ship Centre
Place the cursor anywhere in the view, right-click and select
function moves the vessel symbol to the selected position.
•
Zoom
Place the cursor anywhere in the view, right-click and select
level is provided. Select
•
Erase Echoes
Select
Erase Echoes
236
or on the shortcut menu to delete the one or
Delete All Rulers
to move the own ship symbol back to the centre of the view.
one more time to restore the original view.
Zoom
to "refresh" the view by deleting all the current echoes.
Delete Ruler
Set New Ship Centre
to move the vessel
Reset Ship Centre
Set New Ship Centre
Zoom
from
function
Set New Ship
. The
. Only one zoom
381291/D