Kongsberg Simrad SU90 Operator's Manual page 173

h On the Processor Unit desktop, open folder
i Double-click the URL shortcut to open the Operating Panel configuration page
in the default web browser.
Note
If you have previously changed the IP Address on the Operating Panel, you
must use this address to open the configuration page.
4 Do the firmware update.
a In the browser window, select
b Select
Perform update
c Locate the firmware update file and select
d Select
OK
The firmware update will now take place. The web browser will reload. You
may need to refresh the web browser after some time.
e Make sure that the correct versions have been installed:
Refer to the software release note.
5 If you use a separate computer:
a Disconnect the Operating Panel from the computer.
b Connect the Operating Panel to the Processor Unit. (Ethernet cable)
6 On the Processor Unit desktop, double-click the SU90 icon to start the program.
7 Restore normal operation.
Related topics
Installing and maintaining software, page 153
381291/D
Update
.
when prompted to update.
Maintenance procedures
SIMRAD-Shortcut
.
.
Open
.
171