Kongsberg Simrad SU90 Operator's Manual page 219

–
Tooltip
When you move the cursor over the echograms in the display presentation, small
"tooltips" are shown to provide additional information. The
which tooltips that are shown.
–
Track Line
In order to maintain a visual presentation of your vessel's previous movements,
you can draw these with a line. This line is drawn after the vessel symbol in the
sonar views, and visualizes your past movements. We refer to this line as the
Track Line. The track line provides a line representing the previous positions
of your own ship. Use the settings on the
(in minutes) for the track line.
–
Vertical View Orientation
The
Vertical View Orientation
should be presented from right to left, or from left to right.
–
Off Centre
When the vessel symbol is moved away from the centre of the view, more space
is made available for the echo presentations. If you keep the same range setting,
this added space causes a "zoom" effect. The distance from the vessel to the outer
edge of the search area is the same, but it is "stretched" out. You may not want
this to happen.
–
Current Flow
A current sensor can be connected to the SU90 system. This can for example be
an acoustic Doppler current profiler (ADCP). The information from this sensor is
presented in the applicable views. Use the
for the presentation of the sensor data.
•
Colour Setup
The
Colour Setup
system. This includes the palette ("skin"), the number of colours in use, and the
colour scale when no TVG has been selected for the presentation
•
Docking Views
Each operating mode is presented with a set of views. These are placed at different
positions with different sizes. With the
re-size the views in the display presentation.
381291/D
page allows you to decide whether the vertical views
dialog box controls the presentation colours used by the SU90
page to define the length
Track Line
page to define key settings
Current Flow
function you can move and
Docking Views
Menu system
page controls
Tooltip
217