Procedure
1
Click in the view you want to activate.
The active view is identified with a thicker border. Unless you use the
function, all changes you make will only be applied to this view.
2
Use the joystick to make the adjustment.
Tip
Optionally: Turn the relevant rotary switch to make the adjustment.
The Mk2 Operating Panel is fitted with three rotary switches. The switches are
identified with numbers. Each switch can be assigned a function related to range,
gain or bearing. Investigate the functionality provided on the
This page is located in the
Optionally:
3
In a Horizontal view, select the bearing line and drag it sideways.
Optionally:
4
Observe the
Main
Its default location is on the right side of the display presentation.
5
Select
.
Bearing
6
Make the necessary adjustment.
The following methods can be used to adjust this setting:
a
Select [+] or [-] to choose the requested setting.
b
Place the cursor on the button. Press and hold the left mouse button. Move the
cursor horizontally over the button. Release the mouse button when requested
value is shown.
c
Select the middle of the button to open it. If you have a keyboard connected to
the SU90 system, type the requested value.
7
Open the button and select
the views in the current presentation mode.
Related topics
Starting normal operation, page 23
381291/D
dialog box.
Installation
menu.
if you wish to use the chosen setting in all
Apply to all
Getting started
Apply to all
page.
Operating Panel
37