Kongsberg Simrad SU90 Operator's Manual page 23

you use your Operating Panel to control more than two sonars, press
repeatedly to select.
: Press one of the
C
User Settings
setting. To choose which function to apply open the
User Setting Buttons
Panel. The
Operating Panel
: Press one of the
D
F1 F2 F3
which function to apply open the
assign one function to each
: Press this button to make a copy of the current SU90 presentation.
Screen Capture
You can choose either a single screen capture or a sequence with multiple screen
captures. Open the
: Press the joystick forward to increase the tilt angle in the active view. Turn
E
Joystick
the button on the top of the joystick to change the bearing in the active view.
F : These buttons correspond to the two most common buttons on a
Mouse buttons
standard computer mouse. When an instruction tells you to "select" or "left-click",
press the left button. When an instruction tells you to "right-click", press the right
button.
Use these buttons to lower and hoist the transducer. While the transducer is moving
G
the indicator lamp flashes, and an audible signal is sounded. When the requested
position has been reached, the indicator lamp is lit, and the audible signal stops.
• : Press
Up Up
• : Press
Middle
• : Press
Down
H
Rotary switches
which function to apply open the
, assign one function to each rotary switch on the Operating Panel.
Options
Use these buttons to place markers in the current active view.
I
• : Press
Marker
markers can be placed in the view to identify specific echoes. Each marker
is shown as a small triangle with or without a short identifying label. It is
positioned based on the two known axes in the view as well as the tilt and
bearing of the current ping.
•
Circle Marker
The circle is drawn with the same diameter as your purse. By means of the circle
you can see the size of the school relative to your purse.
• : Press
Gear Gear
provided as a tool to help you plan and shoot the purse seine. The symbol is
intended to be used in a structured sequence that starts when you plan to shoot
the purse seine.
Press these buttons to start position or target tracking.
J
381291/D
User Settings
, assign one predefined setting to each button on the Operating
page is located in the
buttons to apply a predefined function. To choose
Fx
Operating Panel
button on the Operating Panel.
Fx
Screen Captures
to hoist the transducer to its upper position.
to place the transducer in a predefined middle position.
Middle
to lower the transducer to its bottom position.
Down
: Turn a rotary switch to apply a predefined function. To choose
Operating Panel
to place a generic marker in the active view. One or more
Marker
: Press
Circle Marker
to place a gear symbol in the active view. The gear symbol is
buttons to apply a predefined user
Operating Panel
Installation
page. Under
dialog box to select screen capture mode.
page. Under
to place a circular marker in the active view.
Getting started
Sonar Select
page.Under
dialog box.
,
Button Options
Rotary Switch
21