Panasonic PN28080i Operation Manual page 97

<Configuration Example 1>
Overview: Set the status of Port 1 to be closed.
(1) Move to the interface configuration mode for Port 1.
(2) Shut down Port 1.
M24eGi> enable
M24eGi# configure
(1)
M24eGi(config)# interface gi0/1
M24eGi(config-if)# shutdown
(2)
M24eGi(config-if)# exit
M24eGi(config)#
M24eGi#
Fig. 3-4-3 Example of shutting down a port
<Configuration Example 2>
Overview: Set the modes of Ports 2 to 4 to be "100 Mbps full-duplex."
(1) Move to the interface configuration mode for Port 2 to 4.
(2) Set the modes of Ports 2 to 4 at 100 Mbps full-duplex.
M24eGi> enable
M24eGi# configure
(1) M24eGi(config)# interface gi0/2-4
(2) M24eGi(config-if)# speed-duplex 100-full
M24eGi(config-if)# exit
M24eGi(config)# exit
M24eGi#
Fig. 3-4-4 Example of configuring the duplex mode for a port
<Configuration Example 3>
Overview: Enable the Auto MDI/MDI-X function for Ports 5 to 8.
(1) Move to the interface configuration mode for Port 5 to 8.
(2) Set auto to the Auto MDI/MDI-X function for Ports 5 to 8.
M24eGi> enable
M24eGi# configure
(1)
M24eGi(config)# interface gi0/5-8
(2)
M24eGi(config-if)# mdix auto
M24eGi(config-if)# exit
M24eGi(config)# exit
M24eGi#
Fig. 3-4-5 Example of configuring the Auto MDI/MDI-X
97