Panasonic PN28080i Operation Manual page 257

<Setting display example>
The following is an execution example of the authentication status table
display command.
M24eGi> enable
M24eGi# show authentication sort port 1
Total Hosts :0
Authorized Hosts :0
Auth Aging Time :1440 minutes
Port MAC Address
--------- ----------------- ---------- --------------- --------------------
Fig. 4-8-2 Execution example of the authentication status table display
Total Hosts
Authorized
Hosts
Auth Aging
Time
Port
MAC Address
Auth Type
Auth Type Auth Status
command
Displays the total number of hosts registered to the
authentication status table.
Maximum number of hosts retained is 384 for
M8eGi/M16eGi/M24eGi
Displays the number of authorized hosts.
Displays the authentication aging time in minutes.
(factory default setting: 1440)
Displays the port number to which the terminal is
connected.
Displays the MAC address of the target terminal for
authentication.
Displays the authentication method.
Displays the authentication method in successful
authentication if the authentication status is
"Authorized," or the authentication method while
listening if the authentication status is "Unauthorized."
1X/MAC/WEB Indicates one of 802.1X, MAC, and
WEB authentications.
1X/MAC Indicates either of 802.1X or MAC
authentication.
1X/WEB Indicates either of 802.1X or WEB
authentication.
MAC/WEB Indicates either of MAC or WEB
authentication.
802.1X Indicates the 802.1X authentication.
MAC Indicates the MAC authentication.
257
Remaining Aging Time