Panasonic PN28080i Operation Manual page 383

<Command Entry Example>
An example of executing the command to show the port group
information is shown below.
M24eGi> enable
M24eGi# show port-group
(1) (2)
Total Groups : 3
Group ID Group Name
-------- ---------------- --------------------------------- --------
1 Group_1
2 Group_2
M24eGi#
Fig. 4-10-1 Example of executing the command to show the port group
(1) Group ID
Shows the port group ID.
(2) Group Name
Shows the port group name.
(2) Group Member
Shows member ports in the port group.
(3) Status
Shows the status of port grouping.
Enabled
Disabled
(3)
Group Member
1-2
2-4
information
Port grouping is enabled.
Port grouping is disabled.
383
(4)
Status
Enabled
Disabled