Panasonic PN28080i Operation Manual page 246

<Configuration Example>
Overview: Enable the bandwidth control for Port 1, and set the
bandwidth.
(1) Enable the bandwidth control function.
(2) Set the bandwidth to 100 (Mbps).
M24eGi> enable
M24eGi# configure
M24eGi(config)# interface gi0/1
M24eGi(config-if)# egress-rate-limit
(1)
M24eGi(config-if)# egress-rate-limit 100
(2)
M24eGi(config-if)# end
M24eGi#
Fig. 4-6-2 Example of the bandwidth control configuration
246