Panasonic PN28080i Operation Manual page 153

<Command Entry Example>
An example of executing the command to show the MAC address
table (dynamic entries) is shown below.
M24eGi> enable
M24eGi# show mac-address-table mac
(1)
MAC Address
----------------- ------------ ---- ---------
xx:xx:xx:xx:xx:xx Dynamic
xx:xx:xx:xx:xx:xx Dynamic
M24eGi#
Fig. 3-6-3 Example of executing the command to show the MAC address
(1) MAC Address
Lists MAC address entries existing in the MAC address table.
(2) Address Type
Shows the MAC address entry type.
Dynamic
(3) VLAN
Shows the VLAN ID that is learning the MAC address entry.
(4) Port
Shows the interface name.
gi0/1
(2) (3) (4)
Address Type VLAN Port
1 gi0/1
1 gi0/1
table
(dynamic entries)
Dynamically learned MAC address entry
Refers to "Gigabit Ethernet Port 1."
(The number after "gi0/" indicates the port
number.)
153