Panasonic PN28080i Operation Manual page 233

<Configuration Example 1>
Overview: Configure the access control to discard packets destined
for 192.168.1.0/24.
(1) Configure the classifier to target packets destined for an IP
address of 192.168.1.0/24.
(2) Configure the in-profile to discard the target packets.
(3) Configure the port list to target all ports.
(4) Associate configuration items above with policy 1 and set the
policy sequence to 1 for application with top priority.
M24eGi> enable
M24eGi# configure
(1)
M24eGi(config)# AccessControl classifier 1 dst-net 192.168.1.0/24
(2)
M24eGi(config)# AccessControl inprofile 1 deny
(3)
M24eGi(config)# AccessControl portlist 1 1-24
(4)
M24eGi(config)# AccessControl policy 1 portlist 1 classifier 1 policy-sequence 1
inprofile 1
M24eGi(config)#
Fig. 4-4-4 Example of the access control configuration 1
233