show interface counters error [IFNAME]
Shows the statistical information (error).
[Parameter]
Parameter name
[IFNAME]
[Factory Default Setting]
Parameter name
[IFNAME]
[Setting Range]
Parameter name
[IFNAME]
[Note]
Parameter name
[IFNAME]
Note: If the specified interface is not connected, statistical information is
not displayed.
Description
Specify the interface name.
Factory default setting
None
Setting range
<Switch-M24eGi>
gi0/1 to gi0/24 (A range can be specified with
a hyphen.)
None (All ports are displayed.)
<Switch-M16eGi>
gi0/1 to gi0/16 (A range can be specified with
a hyphen.)
None (All ports are displayed.)
<Switch-M8eGi>
gi0/1 to gi0/9 (A range can be specified with a
hyphen.)
None (All ports are displayed.)
Note
None
393