Panasonic PN28080i Operation Manual page 256

<Setting display example>
The following is an execution example of the authentication function
configuration display command.
M24eGi> enable
M24eGi# show authentication
Global MAC Auth Status : Disabled
802.1X Port-based Auth Ports :1-48
802.1X MAC-based Auth Ports :
MAC Auth Ports
WEB Auth Ports
Fig. 4-8-1 Execution example of the authentication function configuration
1. Configuring Global Authentication Function
Global MAC
Auth Status
Global WEB
Auth Status
2. Configuring Target Port for Authentication
802.1X Port-
based Auth
Ports
802.1X MAC-
based Auth
Ports
MAC Auth Ports Displays ports with MAC authentication enabled.
WEB Auth Ports
Global WEB Auth Status : Disabled
:
:
display command
Indicates the MAC authentication operation of entire
device.
Enabled Indicates that the MAC authentication is
enabled.
Disabled Indicates that the MAC authentication is
disabled.
Indicates the WEB authentication operation of entire
device.
Enabled Indicates that the WEB authentication is
enabled.
Disabled Indicates that the WEB authentication is
disabled.
Displays ports with IEEE802.1X port-based
authentication enabled.
Displays ports with IEEE802.1X MAC-based
authentication enabled.
Displays ports with WEB authentication enabled.
256
...1
...2