Panasonic PN28080i Operation Manual page 336

<Configuration example 1>
Overview: Enable MAC authentication for Port 1 to 2. Only allow a
specific terminal registered to local MAC database to
communicate with VLAN1.
Isolate the unregistered terminal to VLAN 100.
1. Move to the interface configuration mode for Port 1, 2.
2. Change PVID for Port 1, 2 to 100.
3. Register XX:XX:XX:XX:XX:XX to local MAC database to assign it
to VLAN 1.
4. Specify Port 1, 2 as target ports for MAC authentication.
5. Enable MAC authentication.
M24eGi> enable
M24eGi# configure
M24eGi(config)# interface GigabitEthernet0/1-2
M24eGi(config-if)# pvid 100
M24eGi(config-if)# exit
M24eGi(config)# aaa authentication auth-mac XX:XX:XX:XX:XX:XX vlan 1
M24eGi(config)# mac-authentication port 1-2
M24eGi(config)# mac-authentication
M24eGi(config)# end
M24eGi#
Fig. 4-13-2 Configuration example of MAC authentication (local database
authentication)
336
･･･1
･･･2
･･･3
･･･4
･･･5