Table of Contents
Advertisement
<Configuration Example>
Overview: Transfer the current configuration information to a TFTP
server whose IP address is 192.168.1.1, specifying the file name as
"switch-1.cfg".
(To cancel the TFTP transfer process, press Ctrl+C during transfer.)
M24eGi> enable
M24eGi# copy running-config tftp 192.168.1.1 switch-1.cfg
M24eGi#
Fig. 6-1 Example of transferring the configuration information
<Configuration Example>
Overview: Reflect the configuration file on a TFTP server to this
Switching Hub.
(1) Retrieve the configuration file "switch-2.cfg" from a TFTP server
whose IP address is 172.16.1.1.
(2) Save the retrieved configuration information. (For details, refer
to chapter 11.)
(To cancel the TFTP transfer process, press Ctrl+C during
transfer.)
M24eGi> enable
(1)
M24eGi# copy tftp 172.16.1.1 switch-2.cfg running-config
(2)
M24eGi# copy running-config startup-config
Configuration saved to startup_config
M24eGi#
Fig. 6-2 Example of transferring the configuration information
Note: The configuration information is not automatically saved in this
Switching Hub just by retrieving the configuration file from the
TFTP server. Make sure to save the configuration information.
(this Switching Hub TFTP server)
(TFTP server this Switching Hub)
396
Advertisement
Table of Contents
