end Command
• Enter this command to switch from configuration modes to the Privileged
mode.
M24eGi(config-if)# end
M24eGi# configure
M24eGi(config)# end ········· Global configuration mode
logout Command
• Enter this command to return to the menu screen from any command
mode.
M24eGi(config)# logout ······· Configuration mode Menu
? Command
• Enter a question mark (?) to view available commands in that command
mode.
M24eGi> ?
enable
exit
logout
ping
M24eGi>
Command History Support
• Press the (up arrow) key to view the history of the entered commands.
······· Interface configuration mode
Privileged mode
Privileged mode
Privilege level to go to.
Exit from current mode
To logout from the CLI shell
Send ICMP ECHO_REQUEST to network hosts
Fig. 1-2 ? command
12