Panasonic PN28080i Operation Manual page 390

Layer 2 switching hub
Hide thumbs Also See for PN28080i:
Table of Contents

Advertisement

<Command Entry Example>
Displayed below are the normal counters and the error counters for
the port 24.
M24eGi> enable
M24eGi# show interface counters gi0/24
Interface GigabitEthernet0/24 is active, which has statistics
Inbound:
Total Octets: 135616937
BroadcastPkts: 802649, MulticastPkts: 195421
UnicastPkts: 5019, Non-unicastPkts: 998008
Outbound:
Total Octets: 1932746
UnicastPkts: 27577, Non-unicastPkts: 62
Inbound packets distribution:
64 Octets: 527240, 65to127 Octets: 290459
128to255 Octets: 19582, 256to511 Octets: 175625
512to1023 Octets: 17739, 1024to1518 Octets: 21
M24eGi# show interface counters error gi0/24
Interface GigabitEthernet0/24 is active, which has statistics
Inbound:
FragmentsPkts: 0, UndersizePkts: 0, OversizePkts: 0
DisacrdsPkts: 605385, ErrorPkts: 0, UnknownProtos: 0
AlignError: 0, CRCAlignErrors: 0, Jabbers: 0, DropEvents: 0
Outbound:
Collisions: 0, LateCollision: 0
SingleCollision: 0, MultipleCollision: 0
DisacrdsPkts: 0, ErrorPkts: 0
M24eGi#
Fig. 5-1 Example of display of the port statistical information (counters)
<Command Entry Example>
Displayed below are the error counters for the link-up port 1 and the
link-down port 2.
M24eGi> enable
M24eGi# show interface counters error gi0/1-2
Interface GigabitEthernet0/1 is active, which has statistics
Inbound:
FragmentsPkts: 0, UndersizePkts: 0, OversizePkts: 1
DisacrdsPkts: 625074, ErrorPkts: 2, UnknownProtos: 0
AlignError: 0, CRCAlignErrors: 1, Jabbers: 0, DropEvents: 0
Outbound:
Collisions: 0, LateCollision: 0
SingleCollision: 0, MultipleCollision: 0
DisacrdsPkts: 0, ErrorPkts: 0
Interface GigabitEthernet0/2 is inactive, no available statistics
M24eGi#
Fig. 5-2 Example of display of the port statistical information
(error counters)
390

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pn28160iPn28240i

Table of Contents