Panasonic PN28080i Operation Manual page 118

<Command Entry Example>
An example of executing the command to show the SSH
configuration is shown below.
M24eGi> enable
M24eGi# show ip ssh
(1)
SSH UI Idle Timeout:
(2)
SSH Auth. Idle Timeout: 120 Sec.
(3)
SSH Auth. Retries Time: 5
(4)
SSH Server:
(5)
SSH Server Key:
M24eGi#
Fig. 3-5-3-1 Example of executing the command to show the SSH
(1) SSH UI Idle Timeout
Shows the maximum inactivity time to wait for a user input in an SSH
session. Upon expiration, the session is automatically terminated.
(2) SSH Auth. Idle Timeout
Shows the response timeout time for SSH authentication.
(3) SSH Auth. Retries Time
Shows the maximum number of SSH authentication retries.
(4) SSH Server
Shows whether or not the access via SSH is allowed.
(5) SSH Server Key
Shows the status of the SSH server key.
5 Min.
Enabled(SSH)
Key exists.
configuration
118