dot1x re-auth-timer local
Align the number of seconds to wait before requesting the client to
reattempt authentication with the switch configuration (dot1x
timeout re-authperiod).
no dot1x re-auth-timer local
Align the number of seconds to wait before requesting the client to
reattempt authentication with the authentication server configuration.
Note: This command is executed from interface configuration mode of
each port.
[Parameter]
Parameter
name
None
[Factory default setting]
Parameter
name
None
[Value setting range]
Parameter
name
None
[Instructions]
Parameter
name
None
Description
Align the number of seconds to wait before
requesting the client to reattempt
authentication with the switch configuration.
Factory default setting
Align the number of seconds to wait before
requesting the client to reattempt
authentication with the authentication server
configuration.
Setting range
None
Instruction
None
294