<Configuration Example 1>
Overview: Enable the Internet mansion function with Ports 23 and 24
set as uplink ports.
(1) Configure the Internet mansion function with Ports 23 and 24
set as uplink ports.
(2) Enter y to enable the Internet mansion function.
(All VLAN configuration and PVID of each port are reset.)
M24eGi> enable
M24eGi# configure
(1)
M24eGi(config)# internet mansion 23,24
This command will remove all VLANs other than VLAN1, and the PVID of all ports
(2)
will be VLAN1. [Y/N] : y
M24eGi(config)# exit
M24eGi#
Fig. 4-1-1-2 Example of configuration of the Internet mansion function
199