Panasonic PN28080i Operation Manual page 248

<Command Entry Example>
An example of executing the command to show the storm control
configuration is shown below.
M24eGi> enable
M24eGi# show storm-control
Interface DLF
(1) (2)
--------- ---------
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
10 disabled
11 disabled
12 disabled
13 disabled
14 disabled
15 disabled
16 disabled
17 disabled
18 disabled
19 disabled
20 disabled
21 disabled
22 disabled
23 disabled
24 disabled
M24eGi#
Fig. 4-7-1 Example of executing the command to show the storm control
(1) Interface
Shows the interface for operating the storm control function.
(2) DLF/Broadcast/Multicast
Shows the status of storm control for unicast packets with unknown
destination (Destination Lookup Fail), broadcast packets, or multicast
packets.
enabled
disabled
(3) Threshold
Shows the threshold value for the number of packets (Packet Per Second).
Broadcast
---------
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
configuration
The storm control is enabled.
The storm control is disabled.
248
Multicast Threshold
(3)
--------- ---------
disabled 0
disabled 0
disabled 0
disabled 0
disabled 0
disabled 0
disabled 0
disabled 0
disabled 0
disabled 0
disabled 0
disabled 0
disabled 0
disabled 0
disabled 0
disabled 0
disabled 0
disabled 0
disabled 0
disabled 0
disabled 0
disabled 0
disabled 0
disabled 0