(7) SNMP Community String
Shows the community name to access via SNMP.
(8) IPv6 Destination
Shows the IPv6 address of the SNMP manager.
(9) Trap Reciever List
Lists the settings of the SNMP trap receivers.
(10) No.
Shows the entry number assigned to the trap receiver.
(11) Status
Shows the status of the SNMP trap receiver.
Enabled
Disabled
(12) IP Destination
Shows the IP address of the SNMP trap receiver.
(13) Version
Shows the SNMP trap type.
v1
v2
(14) Trap Community String
Shows the current community name, used for sending SNMP traps.
(15) IPv6 Destination
Shows the IPv6 address of the SNMP trap receiver.
(16) Individual Trap
Shows the setting of SNMP trap events.
(17) Cold start
Shows the status of Cold start trap.
Enabled
Disabled
The SNMP trap receiver for the entry number is
enabled.
The SNMP trap receiver for the entry number is
disabled.
SNMP v1 traps are sent.
SNMP v2 traps are sent.
The Cold start trap is enabled.
The Cold start failure trap is disabled.
50