Panasonic PN28080i Operation Manual page 315

dot1x mac-based init [<MAC>]
Initialize the authentication status of entire ports or supplicants.
Note: This command is executed from interface configuration mode of
each port.
[Parameter]
Parameter
name
<MAC>
[Factory default setting]
Parameter
name
None
[Value setting range]
Parameter
name
<MAC>
[Instructions]
Parameter
name
None
Description
Specify the MAC address of supplicants for
which authentication is initialized (optional).
Factory default setting
None
Setting range
MAC address on the authentication table.
Instruction
None
315