Panasonic PN28080i Operation Manual page 139

<Configuration Example>
Overview: Configure access settings of a RADIUS server for user login
authentication.
(1) Configure the access settings of a RADIUS server as follows:
Authentication order: 1, IP address: 192.168.1.200, Common
key for authentication: admin.
(2) Configure the first login method to a RADIUS server for
authentication using the username and password.
(3) Set the second login method to the information stored locally
in this Switching Hub for authentication using the username
and password.
M24eGi> enable
M24eGi# conf
(1)
M24eGi(config)# radius-server host 1 ip 192.168.1.200 key admin
(2) M24eGi(config)# login method 1 radius
M24eGi(config)# login method 2 local
(3)
M24eGi(config)# exit
M24eGi#
Fig. 3-5-5-3 Example of the RADIUS server access configuration
139