Table of Contents
Advertisement
<Command Entry Example>
Ten most recent system logs are displayed.
M24eGi> enable
M24eGi# show syslog tail 10
(1)
(2)
(3)
Jan 01 09:01:55 kern.info [SYSTEM] Reboot the system!
Jan 01 09:00:12 kern.info [PORT] Port-1 link-up.
Jan 01 09:00:38 kern.info [SNTP] SNTP first update to 2019/09/30 15:00:53.
Jun 28 15:00:55 kern.info [SYSTEM] Login from console.
Jun 29 19:21:04 kern.info [SYSTEM] Configuration changed!
Jun 30 10:43:31 kern.info [PORT] Port-17 link-up.
Jun 30 10:43:32 kern.info [LINE-PROTOCOL] The loop detected between port18 and port17.
Jun 30 10:43:33 kern.info [PORT] Port-18 link-down.
Jun 30 10:44:34 kern.info [LINE-PROTOCOL] Port17 auto recovery.
Jan 01 09:05:47 kern.info [PORT] Port-23 link-up.
Fig. 10-1 Example of executing the command to show system logs
(1) Mmm dd
Shows the date on which the log was recorded.
(2) hh:mm:ss
Shows the time at which the log was recorded.
(3) kern.xxxx
Shows the importance of the log.
emerg
err
warn
info
(4)
(5)
Indicates "abnormality."
Indicates "error."
Indicates "warning."
Indicates "information."
413
Advertisement
Table of Contents
