Panasonic PN28080i Operation Manual page 78

<Configuration Example>
Overview: Enable the SNMP function, then set the community name
and the address information.
(1) Enable the SNMP agent.
(2) Set the SNMP manager administrative information as below.
community 1, private, Read-Write, 192.168.1.200
(3) Set the SNMP manager administrative information as below.
community 2, public, Read-Only, 192.168.1.200
(4) Set the SNMP trap receiver settings as below.
trap receiver 1, SNMP v1, 192.168.1.200, community public
M24eGi> enable
M24eGi# configure
(1)
M24eGi(config)# snmp-server agent
(2)
M24eGi(config)# snmp-server community 1 private rw 192.168.1.200
(3)
M24eGi(config)# snmp-server community 2 public ro 192.168.1.200
(4)
M24eGi(config)# snmp-server host 1 type v1 192.168.1.200 trap public
M24eGi(config)# end
M24eGi#
Fig. 3-3-2 Example of executing the command to show the SNMP information
78