Cabletron Systems SmartStack STS16-20R Installation And User Manual page 88

74
20 29
- Initializing system address table
- System entering stand-alone mode
- Enabling port: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 22 22
23 24
Press RETURN key to activate console...
Depending upon which tests have run, verify that all diagnostics have passed and
that the ERR LED is off. If the ERR LED is on, read the screen to determine which
test failed. Also see Chapter 10, "Troubleshooting", to help find the cause.
At the end of the boot messages, you should be prompted to press
The following greeting screen of the switch console manager should appear:
At the top level screen, press
of the main menu, the submenus and screens, are described in subsequent chapters.
The information in these chapters includes configuring, monitoring, and viewing
statistics on the SmartStack STS16-20D/STS16-20R.
Note: If you have forgotten the password, you can delete it by pressing the
unlabeled system request button on the front panel of the switch for one second.
Then release it and select Point 4. Clear the system password. This will clear both
the Read-Only and the Read/Write password.
SmartStack STS16-20D/STS16-20R Token Ring Switches Installation and User Guide
to enter the main menu. The contents
ENTER (RETURN)
.
RETURN (ENTER)
Accessing Switch Management