Cabletron Systems SmartStack STS16-20R Installation And User Manual page 139

•
None - Allow all frames in this protocol class (default value).
SRT
The SRT field may have the following values:
•
Yes - Allow transparent bridging for frames in this protocol class (default value).
•
No - Disallow transparent bridging for frames in this protocol class. If No is
selected, only source-routed frames can be bridged between CRFs for this
protocol class.
Ethertype
Information column showing the Ethertype defined for this class.
DSAPs
Informational column showing the DSAPs currently in this class.
Switch Configuration SmartStack STS16-20D/STS16-20R Token Ring Switches Installation and User Guide
125