Reading The Indicators - Epson EB-L20002U User Manual

Reading the Indicators

This projector has the following seven indicators to indicate the projector's status.
The following indicator status are used during regular operation.
"Status varies" indicates that the indicators turn on, off, or flash depending on the status of the projector.
Indicator
Power Status Laser
Blue - On Off Off
Projector's Sta-
tus
Temp Filter
Standby condition
Off Off
Network monitor‐
ing status
A
LAN indicator
Indicates the status of the wired LAN or the HDBaseT.
B
WLAN indicator
Indicates the wireless LAN status.
C
Filter indicator
Indicates the air filter status. This is normally turned off.
D
Temp indicator
Indicates the internal temperature status. This is normally turned off.
E
Laser indicator
Indicates the light source status.
F
Status indicator
Indicates the projector's status.
G
Power indicator
Indicates the projector's status.
Power is being supplied to the projector. In this status, you can start projecting by pressing the [
on the remote control or control panel.
(Sometimes, when the power cord is unplugged, the power indicator remains lit for a short period, but this
is not a fault.)
The projector is being monitored and controlled over a network (when Standby Mode is set to
Communication On).
If the power cord is disconnected and then reconnected in this status, the power indicator flashes blue.
Explanation
169
] button